About: Stampe et Vertongen RSV.32   Sponge Permalink

An Entity of Type : dbkwik:resource/AGhloO_nVTaFp7GvOmHv5Q==, within Data Space : 134.155.108.49:8890 associated with source dataset(s)

{| |} The Stampe et Vertongen RSV.32 was a trainer aircraft produced in Belgium in the early 1920s. Designed originally for the Stampe et Vertongen flying school, the Belgian Air Force became a major operator of the type, where it became the first aircraft of entirely Belgian design and manufacture to enter service. Many others were purchased by flying clubs and private owners. No RSV.32 was in existence by the end of World War II.

AttributesValues
rdf:type
rdfs:label
  • Stampe et Vertongen RSV.32
rdfs:comment
  • {| |} The Stampe et Vertongen RSV.32 was a trainer aircraft produced in Belgium in the early 1920s. Designed originally for the Stampe et Vertongen flying school, the Belgian Air Force became a major operator of the type, where it became the first aircraft of entirely Belgian design and manufacture to enter service. Many others were purchased by flying clubs and private owners. No RSV.32 was in existence by the end of World War II.
sameAs
empty weight kg
  • 500(xsd:integer)
dcterms:subject
dbkwik:military/pr...iPageUsesTemplate
ceiling ft
  • 16000(xsd:integer)
climb rate ftmin
  • 450(xsd:integer)
met or eng?
  • met
eng1 type
gross weight kg
  • 800(xsd:integer)
length in
  • 1(xsd:integer)
primary user
Type
  • trainer aircraft
eng1 kW
  • 67(xsd:integer)
wing area sqft
  • 344(xsd:integer)
height m
  • 2(xsd:double)
Height in
  • 2(xsd:integer)
span m
  • 11(xsd:double)
climb rate ms
  • 2(xsd:double)
Manufacturer
max speed kmh
  • 125(xsd:integer)
empty weight lb
  • 1100(xsd:integer)
ceiling m
  • 5000(xsd:integer)
length m
  • 7(xsd:double)
max speed mph
  • 78(xsd:integer)
National Origin
  • Belgium
length ft
  • 24(xsd:integer)
Height ft
  • 9(xsd:integer)
First Flight
  • 1923(xsd:integer)
span ft
  • 36(xsd:integer)
gross weight lb
  • 1800(xsd:integer)
span in
  • 9(xsd:integer)
wing area sqm
  • 32(xsd:integer)
Crew
  • two
Number Built
  • 57(xsd:integer)
eng1 hp
  • 90(xsd:integer)
Designer
ref
  • Jouhaut 1999, p.33, except as noted
eng1 number
  • 1(xsd:integer)
abstract
  • {| |} The Stampe et Vertongen RSV.32 was a trainer aircraft produced in Belgium in the early 1920s. Designed originally for the Stampe et Vertongen flying school, the Belgian Air Force became a major operator of the type, where it became the first aircraft of entirely Belgian design and manufacture to enter service. Many others were purchased by flying clubs and private owners. No RSV.32 was in existence by the end of World War II. Jean Stampe and Maurice Vertongen, veterans of World War I, founded a flying school at Deurne in 1923. Their research into the training aircraft then available led them to believe that the British-built Central Centaur IV was the best choice for their school. When they discovered that the Centaur IV had just ceased production, their friend, Maurice Boel, introduced them to engineer Alfred Renard, whom Stampe and Vertongen contracted to design a similar aircraft that could be built cheaply and locally. Renard's response was a conventional two-bay biplane with unstaggered wings of equal span. Power was provided by a radial engine in the nose. The student pilot and instructor sat in tandem in a single, open cockpit and communicated through a speaking tube. The main units of the fixed undercarriage shared a common axle, and the tail was supported by a skid. Construction was of wood throughout, braced with wire and covered in fabric, and stressed to withstand rough treatment by student pilots. To reduce costs, many parts were interchangeable, including the struts, longerons, undercarriage legs, and even the upper and lower wings. Initial construction of the prototype commenced in a dance hall in Evere and was completed in the hangar of the Administration de l'Aéronautique (the Belgian Aviation Administration) on 23 April 1923,. The aircraft was registered O-BOEL in honour of the friend who introduced Renard to Stampe and Vertongen. After the prototype had been tested, King Albert I paid a royal visit to Stampe et Vertongen and asked for a joy ride over Antwerp in it. The RSV.32 was produced between 1923 and 1932 and the total number built is sometimes given as fifty-seven, however Paul de Meyer, writing for Air-Britain Digest in 1980 called this number "unlikely" and "greatly exaggerated". The type saw service with not only Stampe et Vertongen's school, but flying schools at Gosselies and Saint-Hubert as well. The Belgian Air Force purchased nineteen examples in three batches. These served until 1936, when surviving machines were sold to private owners. Flying clubs that operated the type included the Antwerp Aviation Club and the Aéro-Club Royal Belge. At least one private owner added a third seat to the aircraft, and at least three examples were converted to 2+2 seating with a fuselage modification designed by Renard. This latter configuration was designated the RSV.32/2X2.
is Developed From of
Alternative Linked Data Views: ODE     Raw Data in: CXML | CSV | RDF ( N-Triples N3/Turtle JSON XML ) | OData ( Atom JSON ) | Microdata ( JSON HTML) | JSON-LD    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3217, on Linux (x86_64-pc-linux-gnu), Standard Edition
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2012 OpenLink Software