The Beretta 92 (also Beretta 96 and Beretta 98) is a series of semi-automatic pistols designed and manufactured by Beretta of Italy. The model 92 was designed in 1972 and production of many variants in different calibers continues today. The United States armed forces replaced the Model 1911A1 .45 ACP pistol in 1985 with the military spec Beretta 92F, the M9. Although only 5,000 copies of the original design were manufactured from 1975 to 1976, the design is currently produced in four different configurations (FS, G, D and DS) and four calibers.
Attributes | Values |
---|
rdf:type
| |
rdfs:label
| |
rdfs:comment
| - The Beretta 92 (also Beretta 96 and Beretta 98) is a series of semi-automatic pistols designed and manufactured by Beretta of Italy. The model 92 was designed in 1972 and production of many variants in different calibers continues today. The United States armed forces replaced the Model 1911A1 .45 ACP pistol in 1985 with the military spec Beretta 92F, the M9. Although only 5,000 copies of the original design were manufactured from 1975 to 1976, the design is currently produced in four different configurations (FS, G, D and DS) and four calibers.
- The Beretta 92FS Inox is a handgun.
- The Beretta 92FS Inox is a pistol that primarily served as a back-up weapon for the Special Forces soldiers, who worked for the Anomaly Research Centre until the EMDs became the primary weapons.
- The Beretta 92 (also Beretta 96 and Beretta 98) is a series of semi-automatic pistols. he Beretta 92 pistol evolved from earlier Beretta designs, most notably the M1922 and M1951. From the M1922 comes the open slide design, while the alloy frame and locking block barrel (originally from Walther P38) were first used in the M1951. The grip angle and the front sight integrated with the slide were also common to earlier Beretta pistols. Perhaps the Model 92's two most important advanced design features appeared on its immediate predecessor, the 1974 .380 caliber Model 84. The Inox models feature the following parts made in stainless steel: the barrel, the slide (including the extractor, the safety and the right-side manual safety lever), the trigger (and trigger pin), and slide stop lever.
- Beretta 92FS Inox is a stainless steel variant of the Beretta 92FS, Inox is short for "inoxydable", with the slide, barrel and minor parts being made of stainless steel instead of black carbon steel.
- The Inox models (from the French "inoxidable" meaning non-oxidizing) feature the following parts made in anodized stainless steel with a light bead blasting finish rather than blued carbon steel: the barrel, the slide (including the extractor, the safety and the right-side manual safety lever), the trigger (and trigger pin), and slide stop lever. The older Italian-made Beretta Inoxes are usually better received than the American-made Inoxes, which feature blued controls, giving them a semi two-tone look. The Inox models are some of the most popular Berettas and are still produced today.
|
dcterms:subject
| |
dbkwik:breaking-ba...iPageUsesTemplate
| |
dbkwik:breakingbad...iPageUsesTemplate
| |
dbkwik:primeval/pr...iPageUsesTemplate
| |
dbkwik:resident-ev...iPageUsesTemplate
| |
dbkwik:residentevi...iPageUsesTemplate
| |
dbkwik:walkingdead...iPageUsesTemplate
| |
Users
| |
Appearances
| |
Last
| |
Name
| |
Type
| |
First
| - "Everything Dies"
- "Long Road Ahead"
|
feedtype
| |
Caliber
| |
Model
| |
color text
| |
Manufacturer
| |
Lifespan
| - "Everything Dies"
- "Long Road Ahead" to Present
|
bgcolour
| |
Ammo
| |
Action
| |
Owner
| |
Custom
| |
Creator
| - Fabbrica d'Armi Piertro Beretta
|
abstract
| - The Beretta 92 (also Beretta 96 and Beretta 98) is a series of semi-automatic pistols designed and manufactured by Beretta of Italy. The model 92 was designed in 1972 and production of many variants in different calibers continues today. The United States armed forces replaced the Model 1911A1 .45 ACP pistol in 1985 with the military spec Beretta 92F, the M9. Although only 5,000 copies of the original design were manufactured from 1975 to 1976, the design is currently produced in four different configurations (FS, G, D and DS) and four calibers.
- The Inox models (from the French "inoxidable" meaning non-oxidizing) feature the following parts made in anodized stainless steel with a light bead blasting finish rather than blued carbon steel: the barrel, the slide (including the extractor, the safety and the right-side manual safety lever), the trigger (and trigger pin), and slide stop lever. The older Italian-made Beretta Inoxes are usually better received than the American-made Inoxes, which feature blued controls, giving them a semi two-tone look. The Inox models are some of the most popular Berettas and are still produced today. The pistol is mostly made of metal, and therefore has quite a weight to it, weighing around 33.3 ounces, unlike other polymer-framed pistols, like Glocks. The pistol features a squared crescent-shaped trigger guard for easier aiming, an ambidextrous safety lever located on the slide and an external hammer. The gun's barrel may be the most unique part of the gun, however, as it is exposed, allowing a 180 degree window for a shell to escape, nearly eliminating the possibility of a shell getting jammed in the bolt. The pistol is chambered for 9x19mm parabellum (9mm) rounds in a fifteen round high-capacity magazine. The gun has an effective range of fifty meters and a muzzle velocity of 1,250 feet per second. The blued stainless-steel slide is coated in a corrosion-resistant material called Bruniton. One of the most interesting and unique features of the Beretta 92 is its exposed barrel, which allows for less of a chance of a jam. Other pistols like the Glock or 1911, have a hidden barrel, cloaked underneath the side, with the ejection port on one side of the gun. This allows for an easy jam. The Beretta 92's exposed barrel allows for easy cooling as well and gives it a futuristic appearance. The Isreali Desert Eagle large caliber pistol also features this exposed slide feature. Both pistols also feature the barrel locked in place, unlike most other pistol barrels, which are not held down and can move very easily. When the slide locks back, the barrel is held in place by a loop on the frame, so it won't move and risk the possibility of falling apart. The exposed and locked barrel is one of the most attractive features about this gun to veteran and beginning shooters. The 92FS has been tested by the military and has fired 168,000 rounds without a malfunction. The average 92 can fire over 35,000 rounds before the slide stops working properly.
- The Beretta 92FS Inox is a handgun.
- The Beretta 92FS Inox is a pistol that primarily served as a back-up weapon for the Special Forces soldiers, who worked for the Anomaly Research Centre until the EMDs became the primary weapons.
- The Beretta 92 (also Beretta 96 and Beretta 98) is a series of semi-automatic pistols. he Beretta 92 pistol evolved from earlier Beretta designs, most notably the M1922 and M1951. From the M1922 comes the open slide design, while the alloy frame and locking block barrel (originally from Walther P38) were first used in the M1951. The grip angle and the front sight integrated with the slide were also common to earlier Beretta pistols. Perhaps the Model 92's two most important advanced design features appeared on its immediate predecessor, the 1974 .380 caliber Model 84. The Inox models feature the following parts made in stainless steel: the barrel, the slide (including the extractor, the safety and the right-side manual safety lever), the trigger (and trigger pin), and slide stop lever.
- Beretta 92FS Inox is a stainless steel variant of the Beretta 92FS, Inox is short for "inoxydable", with the slide, barrel and minor parts being made of stainless steel instead of black carbon steel.
|
is wikipage disambiguates
of | |