| abstract
| - After the defeat of the Shang, the Zhou Dynasty used many weapons and types of equipment that originally came from the Shang. However, the Zhou incorporated some of their own different styles of armour. One type was the gé jiǎ (), a sleeveless coat of animal hide formed on a wooden dummy. The hide used was of buffalo and rhinoceros. Because of the disappearance of the rhinoceros in the region, buffalo came to be most common material. Another type of armour used by the Zhou was the wei jia, made of boiled leather with a fabric backing. Red lacquer was often used to form a protective layer for most armour used by the Zhou. Chariots were used extensively during the Spring and Autumn Period. The chariots were mainly used as a shock weapon and a platform for archers. Since the chariot was restricted to flat terrain, charioteers could be defeated when battling well-organized infantry. Shang chariots were often drawn by two horses; later, the Zhou introduced a four-horse chariot. The crew of the chariot was made up of noblemen, so all would have worn armour. Zhou chariots were protected by leather, and sometimes came with a canopy to protect the crew from the weather, but this was probably removed before going into battle. Chariot horses were protected by a blanket made of animal skins, with tiger skin being most popular, though sometimes horses wore lamellar peytral made of leather, which protected the horses' chests and necks. Chariot use declined during the Warring States period, probably because of the introduction of the crossbow and cavalry. Most of the kingdoms of the Warring States maintained large armies, numbering anywhere from 30,000 to 100,000. With the technology and resources of the time, it was not possible to provide all soldiers with armour. Armour was most common for wealthier or higher ranked soldiers. During the Warring States era, most armour was made of leather or bronze (occasionally iron), or a combination of both. The metal that was used most for military purposes was bronze. Cast iron began to appear in the 5th century BC, but did not begin to replace bronze until the 2nd century BC. Most infantrymen wore lamellar or coat of plates cuirasses. The lamellar cuirass worn by these men was made of hundreds of small overlapping metal and/or leather plates laced together to make a flexible and light coat of armour. Coat of plates consisted of hundreds of small non-overlapping metal or leather plates stitched or riveted together. Shoulder guards and helmets were often used, but leather caps seem to have been more common for ground infantry. During much of the Warring States period, most light cavalry units served as skirmishers - thus armour for cavalry was rare, as it was not seen as necessary. Armour for heavier cavalry tended to be lighter than that of the infantry. Cavalry armour was usually constructed entirely of leather, and lacked shoulder protection. However, during the late Warring States era and the dynasties succeeding it, cavalry armour gradually become heavier and more elaborate. (i.e. Heavy Cavalry with full body protection for both rider and horse, ranging from coat of plates to lamellar from the Han Dynasty or elaborate interlocking triangular scales from the Tang and Song Dynasty) Most evidence for armour development during this period comes from the Terracotta Warriors of Qin Shi Huang. Some terracotta warriors wore no armour; it is suggested that most were conscripts playing the role of skirmishers or support troops for the chariots. They are armed with crossbows and were usually placed at the front of formations. Because of the early use of crossbow technology, these conscripts may not have need armour for close fighting, instead adapting more mobile tactics similar to rifle or musket shooting by rows. Of the terra cotta warriors thus uncovered, Pit 1 has approximately 61 percent of the soldiers wearing armour, Pit 2 over 90 percent, and pit 3, being in a command compound, 100 percent. Traces of black paint on these figures suggest that the Qin may have used black lacquered plates to form coat of plates and lamellar for their armour. Many different styles of armour were found, but examples of armours from ancient China are rare. Qin Shi Huang ordered weapons, and probably armour too, to be destroyed by fire. This is likely the reason that so few examples of ancient armour exist today. After the fall of the Qin in 207 BC came the rise of the Han Dynasty in 202 BC. During the Han Dynasty, new style of armour such as scale corselet made of leather and/or iron were adopted. During this time period, the primary metal used in armour was iron, and occasionally steel. Early Han soldiers would have used armour and weapons produced during the Qin era. The Western Han army had armour standardized to meet the need. Armour used by the Han included coats of plates; 两当铠 (liang-tang, or "double-faced" armour); and lamellar cuirases made of metal or leather that was suspended over the shoulders by cords. This armour was used by both the infantry and the cavalry. A much heavier and more expensive version, consisting of metal plates laced together, was worn by officers. Shields were used by both infantry and cavalry. These shields were usually made of wood and often reinforced by a metal centre and rim. Armour for horses began to appear around the end of the Han dynasty, but the earliest armour yet found dates to the year 302 AD. During the Three Kingdoms Period, fully armoured cavalry (armour covering both the rider and horse) were extensively used as shock troops. Early horse armour came in one piece, but later horse armour came in multiple pieces: chanfron (head protector); neck guards; chest guards; shoulder guards; flank pieces; and crupper. Most cavalry served as mounted archers, and sometimes removed their arm protection to use their bows or crossbows.
|
![[RDF Data]](/fct/images/sw-rdf-blue.png)