About: Mitsubishi d50 springs   Sponge Permalink

An Entity of Type : owl:Thing, within Data Space : 134.155.108.49:8890 associated with source dataset(s)

The front coil springs from a Mitsubishi d50 pickup can be used as rear springs on a 510. They fit without modification, but may be cut to length to provide the desired ride height and spring rate. The reported wheel spring rate for these springs is in the 125 lb/in - 150 lb/in range depending on final cut spring length.

AttributesValues
rdfs:label
  • Mitsubishi d50 springs
rdfs:comment
  • The front coil springs from a Mitsubishi d50 pickup can be used as rear springs on a 510. They fit without modification, but may be cut to length to provide the desired ride height and spring rate. The reported wheel spring rate for these springs is in the 125 lb/in - 150 lb/in range depending on final cut spring length.
dcterms:subject
abstract
  • The front coil springs from a Mitsubishi d50 pickup can be used as rear springs on a 510. They fit without modification, but may be cut to length to provide the desired ride height and spring rate. The reported wheel spring rate for these springs is in the 125 lb/in - 150 lb/in range depending on final cut spring length.
Alternative Linked Data Views: ODE     Raw Data in: CXML | CSV | RDF ( N-Triples N3/Turtle JSON XML ) | OData ( Atom JSON ) | Microdata ( JSON HTML) | JSON-LD    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3217, on Linux (x86_64-pc-linux-gnu), Standard Edition
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2012 OpenLink Software