About: Hose Management Project, Fresenius   Sponge Permalink

An Entity of Type : owl:Thing, within Data Space : 134.155.108.49:8890 associated with source dataset(s)

This hose management project was started because of several factors: to reduce injuries from bending over to pick the hosing, to prevent the machine or chair from pinching the hosing, and to improve the mobility of the machines. The project was successful and improved all three factors. The staff was very surprise how mobile the machines are now. The following are the parts that were used: McMaster-Carr part #1730A92 Vinyl-Coated Steel J-Hook 80 lb Load Cap, 5-1/2" Height, 3-3/4" Projection 1 inch M-5 bolt to replace the standard upper rear panel bolt Large washer Lock washer

AttributesValues
rdfs:label
  • Hose Management Project, Fresenius
rdfs:comment
  • This hose management project was started because of several factors: to reduce injuries from bending over to pick the hosing, to prevent the machine or chair from pinching the hosing, and to improve the mobility of the machines. The project was successful and improved all three factors. The staff was very surprise how mobile the machines are now. The following are the parts that were used: McMaster-Carr part #1730A92 Vinyl-Coated Steel J-Hook 80 lb Load Cap, 5-1/2" Height, 3-3/4" Projection 1 inch M-5 bolt to replace the standard upper rear panel bolt Large washer Lock washer
dcterms:subject
abstract
  • This hose management project was started because of several factors: to reduce injuries from bending over to pick the hosing, to prevent the machine or chair from pinching the hosing, and to improve the mobility of the machines. The project was successful and improved all three factors. The staff was very surprise how mobile the machines are now. The following are the parts that were used: McMaster-Carr part #1730A92 Vinyl-Coated Steel J-Hook 80 lb Load Cap, 5-1/2" Height, 3-3/4" Projection 1 inch M-5 bolt to replace the standard upper rear panel bolt Large washer Lock washer Metal primer to cover the part of the steel not coated with vinyl To install remove the original left bolt on the upper rear panel. Then assembly and screw in the hook, large washer, lock washer and 1 inch bolt.
Alternative Linked Data Views: ODE     Raw Data in: CXML | CSV | RDF ( N-Triples N3/Turtle JSON XML ) | OData ( Atom JSON ) | Microdata ( JSON HTML) | JSON-LD    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3217, on Linux (x86_64-pc-linux-gnu), Standard Edition
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2012 OpenLink Software