About: Ford Model TT   Sponge Permalink

An Entity of Type : owl:Thing, within Data Space : 134.155.108.49:8890 associated with source dataset(s)

The Ford Model TT is a truck made by the Ford Motor Company. It was rated at one ton. It was based on the Ford Model T, but with a heavier frame and rear axle.The rear axle had a worm drive and crown wheel,unlike the Ford Model T's Crown wheel and pinion. The worm was located at the end of the driveshaft and above the crown wheel. The wheelbase of the car was 100 inches and the wheelbase of the TT was 125 inches. It was often equipped with a 'ruckstell axle' or some other accessory gearbox which allowed the truck to have an intermediate gear between low and high, which was useful for hill climbing. It was often sold as a chassis with the buyer supplying the truck body as needed. Mass production with Ford produced bodies ran from 1925 to 1927, but production of the Ford TT had started with

AttributesValues
rdfs:label
  • Ford Model TT
rdfs:comment
  • The Ford Model TT is a truck made by the Ford Motor Company. It was rated at one ton. It was based on the Ford Model T, but with a heavier frame and rear axle.The rear axle had a worm drive and crown wheel,unlike the Ford Model T's Crown wheel and pinion. The worm was located at the end of the driveshaft and above the crown wheel. The wheelbase of the car was 100 inches and the wheelbase of the TT was 125 inches. It was often equipped with a 'ruckstell axle' or some other accessory gearbox which allowed the truck to have an intermediate gear between low and high, which was useful for hill climbing. It was often sold as a chassis with the buyer supplying the truck body as needed. Mass production with Ford produced bodies ran from 1925 to 1927, but production of the Ford TT had started with
sameAs
dcterms:subject
dbkwik:tractors/pr...iPageUsesTemplate
abstract
  • The Ford Model TT is a truck made by the Ford Motor Company. It was rated at one ton. It was based on the Ford Model T, but with a heavier frame and rear axle.The rear axle had a worm drive and crown wheel,unlike the Ford Model T's Crown wheel and pinion. The worm was located at the end of the driveshaft and above the crown wheel. The wheelbase of the car was 100 inches and the wheelbase of the TT was 125 inches. It was often equipped with a 'ruckstell axle' or some other accessory gearbox which allowed the truck to have an intermediate gear between low and high, which was useful for hill climbing. It was often sold as a chassis with the buyer supplying the truck body as needed. Mass production with Ford produced bodies ran from 1925 to 1927, but production of the Ford TT had started with the first TT chassis being released in 1917. It was very durable for the time, but slow when compared to more modern expectations. With standard gearing, a speed of not more than 15 m.p.h. was recommended, and with special gearing, a speed of not more than 22 m.p.h. was recommended, according to Ford Dealers Data Book 1923. Standard worm gear ratio was 7.25:1, special gearing 5.17:1 Production numbers for the Ford Model TT Year - Production * 1917 - 3 * 1918 - 41,105 * 1919 - 70,816 * 1920 - 135,002 * 1921 - 118,583 * 1922 - 135,629 * 1923 - 197,057 * 1924 - 139,435 * 1925 - 197,390 * 1926 - 228,496 * 1927 - 83,202 * Production numbers do not include foreign production
is Predecessor of
Alternative Linked Data Views: ODE     Raw Data in: CXML | CSV | RDF ( N-Triples N3/Turtle JSON XML ) | OData ( Atom JSON ) | Microdata ( JSON HTML) | JSON-LD    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3217, on Linux (x86_64-pc-linux-gnu), Standard Edition
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2012 OpenLink Software