About: Colt M1917 Revolver   Sponge Permalink

An Entity of Type : owl:Thing, within Data Space : 134.155.108.49:8890 associated with source dataset(s)

The frame was solid (meaning an integrated "bridge" was fitted over the cylinder for a more durable design) with a smooth barrel protruding forwards and marked with a forward blade sight just aft of the muzzle. The barrel measured a standard length of 5.5 inches while the revolver exhibited an overall length of 10.8 inches. A rear notch sight was also included in the design. The trigger ring was integrated into the receiver itself and managed a curved, double-action trigger assembly. This "doubleaction" terminology meant that no manually-actuated cocking of the hammer was required on the part of the operator - he need only pull the trigger and the hammer cocked automatically (though it could still be managed manually if so desired). The pistol grip was well-contoured downwards for a firm h

AttributesValues
rdfs:label
  • Colt M1917 Revolver
rdfs:comment
  • The frame was solid (meaning an integrated "bridge" was fitted over the cylinder for a more durable design) with a smooth barrel protruding forwards and marked with a forward blade sight just aft of the muzzle. The barrel measured a standard length of 5.5 inches while the revolver exhibited an overall length of 10.8 inches. A rear notch sight was also included in the design. The trigger ring was integrated into the receiver itself and managed a curved, double-action trigger assembly. This "doubleaction" terminology meant that no manually-actuated cocking of the hammer was required on the part of the operator - he need only pull the trigger and the hammer cocked automatically (though it could still be managed manually if so desired). The pistol grip was well-contoured downwards for a firm h
dcterms:subject
dbkwik:world-war-2...iPageUsesTemplate
abstract
  • The frame was solid (meaning an integrated "bridge" was fitted over the cylinder for a more durable design) with a smooth barrel protruding forwards and marked with a forward blade sight just aft of the muzzle. The barrel measured a standard length of 5.5 inches while the revolver exhibited an overall length of 10.8 inches. A rear notch sight was also included in the design. The trigger ring was integrated into the receiver itself and managed a curved, double-action trigger assembly. This "doubleaction" terminology meant that no manually-actuated cocking of the hammer was required on the part of the operator - he need only pull the trigger and the hammer cocked automatically (though it could still be managed manually if so desired). The pistol grip was well-contoured downwards for a firm hand hold and covered over in wooden detail. The exposed hammer spur protruded from the rear of the receiver which allowed for manual cocking if required. An ejector rod was fitted under the barrel ahead of the frame and this was furthermore connected to the cylinder. The cylinder was fluted along its surface and bored to accepted six cartridges of .45 ACP or .45 Auto Rim ammunition, rotating smoothly in its stout frame. For reloading, the cylinder was designed to "swing out" for easy access to each of the available cartridge chambers. Overall weight was 2.5 lbs while muzzle velocity was rated at 760 feet per second.
is List of
Alternative Linked Data Views: ODE     Raw Data in: CXML | CSV | RDF ( N-Triples N3/Turtle JSON XML ) | OData ( Atom JSON ) | Microdata ( JSON HTML) | JSON-LD    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3217, on Linux (x86_64-pc-linux-gnu), Standard Edition
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2012 OpenLink Software