About: Baby Pool Moat How-To

Description
Metadata
Settings
- owl:sameAs
- Inference Rule:

About: Baby Pool Moat How-To Sponge Permalink

An Entity of Type : owl:Thing, within Data Space : 134.155.108.49:8890 associated with source dataset(s)

Here is the process step by step. Buy a large pool and a smaller one,the big one I used is 1.12m (44") in diameter. The top ring is obsolete and can even interfere so I cut it off. (Make sure the rings are not interconnected and each has a separate valve.) Draw the outline of the inner pool, it makes it easier to apply the glue. I used all-purpose cement but you can use Vinyl glue which is designated for inflatables. However since it's more expensive and durability is not an issue I went for the less expensive glue. Apply glue on both sides and let dry for 10 min. --Author: Oferfal

Attributes	Values
rdfs:label	Baby Pool Moat How-To
rdfs:comment	Here is the process step by step. Buy a large pool and a smaller one,the big one I used is 1.12m (44") in diameter. The top ring is obsolete and can even interfere so I cut it off. (Make sure the rings are not interconnected and each has a separate valve.) Draw the outline of the inner pool, it makes it easier to apply the glue. I used all-purpose cement but you can use Vinyl glue which is designated for inflatables. However since it's more expensive and durability is not an issue I went for the less expensive glue. Apply glue on both sides and let dry for 10 min. --Author: Oferfal
dcterms:subject	How-To KIB
dbkwik:soapbubble/...iPageUsesTemplate	dbkwik:resource/BdD8Gj2-wfbJ6kKo4gaaQQ==
abstract	Here is the process step by step. Buy a large pool and a smaller one,the big one I used is 1.12m (44") in diameter. The top ring is obsolete and can even interfere so I cut it off. (Make sure the rings are not interconnected and each has a separate valve.) Draw the outline of the inner pool, it makes it easier to apply the glue. I used all-purpose cement but you can use Vinyl glue which is designated for inflatables. However since it's more expensive and durability is not an issue I went for the less expensive glue. Apply glue on both sides and let dry for 10 min. Place the inner pool in the marked circle, start from the middle and push outward so no air is trapped in between. I applied some more glue just for good measure, and voila, you've got yourself an inflatable moat. The kid can stand inside the inner empty pool --Author: Oferfal

OpenLink Virtuoso version 07.20.3217, on Linux (x86_64-pc-linux-gnu), Standard Edition
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2012 OpenLink Software