AND Gates are used in creating logic gates. The AND Gate activates its digital output when all of the inputs attached to it are active. The amount of inputs that the AND gate has can be tweaked, and the amount of inputs can be between two to a hundred.
| Attributes | Values |
|---|
| rdfs:label
| |
| rdfs:comment
| - AND Gates are used in creating logic gates. The AND Gate activates its digital output when all of the inputs attached to it are active. The amount of inputs that the AND gate has can be tweaked, and the amount of inputs can be between two to a hundred.
- The AND gate is a digital logic gate that implements logical conjunction - it behaves according to the truth table to the right. A HIGH output (1) results only if both the inputs to the AND gate are HIGH (1). If neither or only one input to the AND gate is HIGH, a LOW output results.
- The AND Gate is an item found at Link's Logic. The AND Gate is used to compare two signals together to create an output using a logical expression. The AND Gate has two inputs and one output. The output will turn on when both inputs are on. This can be useful if you want to make sure nobody else uses your pressure plate because you can turn the Lever off when you are finished with the pressure plate so no other players can use it. Doing this will help combat issues with other players on your base without blacklisting. Signal Inverters and AND gates put together can make a NAND gate. 0 = Off
|
| sameAs
| |
| dcterms:subject
| |
| dbkwik:littlebigpl...iPageUsesTemplate
| |
| dbkwik:lumber-tyco...iPageUsesTemplate
| |
| dbkwik:lumbertycoo...iPageUsesTemplate
| |
| Type
| |
| Description
| - "Compares two input signals to generate an output signal based on a logical operation."
|
| Cost
| |
| dbkwik:lumber-tyco...iPageUsesTemplate
| |
| Usage
| - Emitting a signal when both inputs are on
|
| Location
| |
| Boxed Image
| |
| Unboxed Image
| |
| abstract
| - AND Gates are used in creating logic gates. The AND Gate activates its digital output when all of the inputs attached to it are active. The amount of inputs that the AND gate has can be tweaked, and the amount of inputs can be between two to a hundred.
- The AND Gate is an item found at Link's Logic. The AND Gate is used to compare two signals together to create an output using a logical expression. The AND Gate has two inputs and one output. The output will turn on when both inputs are on. This can be useful if you want to make sure nobody else uses your pressure plate because you can turn the Lever off when you are finished with the pressure plate so no other players can use it. Doing this will help combat issues with other players on your base without blacklisting. Signal Inverters and AND gates put together can make a NAND gate. A = Left input B = Right input 0 = Off 1 = On Basically a And gate means one power input AND the other must be activated as it name suggests
- The AND gate is a digital logic gate that implements logical conjunction - it behaves according to the truth table to the right. A HIGH output (1) results only if both the inputs to the AND gate are HIGH (1). If neither or only one input to the AND gate is HIGH, a LOW output results.
|
![[RDF Data]](/fct/images/sw-rdf-blue.png)