About: Rumpler C.III   Sponge Permalink

An Entity of Type : dbkwik:resource/AGhloO_nVTaFp7GvOmHv5Q==, within Data Space : 134.155.108.49:8890 associated with source dataset(s)

{| |} The Rumpler C.III (factory designation 6A5) was a military reconnaissance aircraft built in Germany during World War I. It was a development of the Rumpler C.I design incorporating many aerodynamic refinements, including wing planform, airfoil section, and horn-balanced ailerons, revised empennage, and new rear fuselage decking with compound curves. This latter feature was later removed and replaced with a simplified structure, at which point the factory designation was changed to 6A6. Performance was improved over that of the C.I, and the C.III was selected for limited production, thought to be about 75 aircraft. The Frontbestand table of C-type aircraft at the front shows a maximum of 42 C.III aircraft at the front on 28 February 1917. With the introduction of the more powerful Rum

AttributesValues
rdf:type
rdfs:label
  • Rumpler C.III
rdfs:comment
  • {| |} The Rumpler C.III (factory designation 6A5) was a military reconnaissance aircraft built in Germany during World War I. It was a development of the Rumpler C.I design incorporating many aerodynamic refinements, including wing planform, airfoil section, and horn-balanced ailerons, revised empennage, and new rear fuselage decking with compound curves. This latter feature was later removed and replaced with a simplified structure, at which point the factory designation was changed to 6A6. Performance was improved over that of the C.I, and the C.III was selected for limited production, thought to be about 75 aircraft. The Frontbestand table of C-type aircraft at the front shows a maximum of 42 C.III aircraft at the front on 28 February 1917. With the introduction of the more powerful Rum
sameAs
empty weight kg
  • 839(xsd:integer)
dcterms:subject
dbkwik:military/pr...iPageUsesTemplate
range km
  • 480(xsd:integer)
ceiling ft
  • 13100(xsd:integer)
met or eng?
  • met
range miles
  • 300(xsd:integer)
eng1 type
gross weight kg
  • 1264(xsd:integer)
length in
  • 11(xsd:integer)
Type
  • Reconnaissance aircraft
eng1 kW
  • 160(xsd:integer)
wing area sqft
  • 374(xsd:integer)
height m
  • 3(xsd:double)
Height in
  • 8(xsd:integer)
span m
  • 12(xsd:double)
Manufacturer
max speed kmh
  • 136(xsd:integer)
empty weight lb
  • 1845(xsd:integer)
ceiling m
  • 4000(xsd:integer)
length m
  • 8(xsd:double)
max speed mph
  • 85(xsd:integer)
National Origin
  • Germany
length ft
  • 26(xsd:integer)
Height ft
  • 10(xsd:integer)
First Flight
  • 1916(xsd:integer)
span ft
  • 41(xsd:integer)
gross weight lb
  • 2780(xsd:integer)
span in
  • 6(xsd:integer)
wing area sqm
  • 34(xsd:double)
Crew
  • Two, pilot and observer
Armament
  • 1(xsd:integer)
  • 100(xsd:integer)
eng1 hp
  • 220(xsd:integer)
ref
  • Kroschel & Stützer 1994, p.127
eng1 number
  • 1(xsd:integer)
abstract
  • {| |} The Rumpler C.III (factory designation 6A5) was a military reconnaissance aircraft built in Germany during World War I. It was a development of the Rumpler C.I design incorporating many aerodynamic refinements, including wing planform, airfoil section, and horn-balanced ailerons, revised empennage, and new rear fuselage decking with compound curves. This latter feature was later removed and replaced with a simplified structure, at which point the factory designation was changed to 6A6. Performance was improved over that of the C.I, and the C.III was selected for limited production, thought to be about 75 aircraft. The Frontbestand table of C-type aircraft at the front shows a maximum of 42 C.III aircraft at the front on 28 February 1917. With the introduction of the more powerful Rumpler C.IV based on a refined C.III airframe, the number of operational C.III aircraft at the front dropped rapidly and by the autumn of 1917 only one was at the front. The C.III was a qualified success, but its design served mainly as a stepping stone to the further refined C.IV.
Alternative Linked Data Views: ODE     Raw Data in: CXML | CSV | RDF ( N-Triples N3/Turtle JSON XML ) | OData ( Atom JSON ) | Microdata ( JSON HTML) | JSON-LD    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3217, on Linux (x86_64-pc-linux-gnu), Standard Edition
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2012 OpenLink Software