About: Claymills Pumping Station   Sponge Permalink

An Entity of Type : owl:Thing, within Data Space : 134.155.108.49:8890 associated with source dataset(s)

The main pumping plant consists of four Woolf compound, rotative, beam pumping engines. These are arranged in mirror image pairs, in two separate engine houses, with a central boiler house (containing five Lancashire boilers with economisers) and chimney. The engines were built in 1885 by Gimson and Company of Leicester. All the engines are similar and the following description is limited to only one, but applicable to all. Currently C and D engines are able to run under steam, work is ongoing to restore the A and B engines.

AttributesValues
rdfs:label
  • Claymills Pumping Station
rdfs:comment
  • The main pumping plant consists of four Woolf compound, rotative, beam pumping engines. These are arranged in mirror image pairs, in two separate engine houses, with a central boiler house (containing five Lancashire boilers with economisers) and chimney. The engines were built in 1885 by Gimson and Company of Leicester. All the engines are similar and the following description is limited to only one, but applicable to all. Currently C and D engines are able to run under steam, work is ongoing to restore the A and B engines.
sameAs
dcterms:subject
dbkwik:tractors/pr...iPageUsesTemplate
abstract
  • The main pumping plant consists of four Woolf compound, rotative, beam pumping engines. These are arranged in mirror image pairs, in two separate engine houses, with a central boiler house (containing five Lancashire boilers with economisers) and chimney. The engines were built in 1885 by Gimson and Company of Leicester. All the engines are similar and the following description is limited to only one, but applicable to all. The high pressure cylinder is 24 inch bore by 6 ft stroke and the low pressure cylinder is 38 inch bore by 8 feet stroke. Steam is distributed by means of double beat 'Cornish' valves, mounted in upper and lower valve chests. The cylinders act on one end of the beam, via Watt's parallel motion. The beam itself is 26 feet 4 inches between end centres, 4 feet deep at the centre, weighs 13 tons and is carried on 12 inch diameter bearings. Currently C and D engines are able to run under steam, work is ongoing to restore the A and B engines. Many small engines are running in the various out buildings off the steam from the 5 Lancashire boilers in the boiler house between the two engine houses and the road / railway line. The modern sewage works, run by Severn Trent Water, is alongside the old pumping station, on the site of the original settlement ponds / lagoons.
Alternative Linked Data Views: ODE     Raw Data in: CXML | CSV | RDF ( N-Triples N3/Turtle JSON XML ) | OData ( Atom JSON ) | Microdata ( JSON HTML) | JSON-LD    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3217, on Linux (x86_64-pc-linux-gnu), Standard Edition
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2012 OpenLink Software