About: Eurorack   Sponge Permalink

An Entity of Type : owl:Thing, within Data Space : 134.155.108.49:8890 associated with source dataset(s)

A modular synthesizer format which falls into the "small format" category. Originally derived from various standards for 19" rack system based industrial and lab instrumentation known as (DIN 41494 / IEC 297-3 / IEEE 1001.1) and sometimes housed 'Eurocard' technology. Not to be confusedor with the line of low-cost mixers marketed by Behringer under this name. The Eurorack format calls for modules of 128.5mm (slightly over 5") height. Horizontal width is measured in "horizontal pitch", where 1 HP = 5.08mm (exactly 0.2"). 3.5mm mono phone jacks are used for interconnection.

AttributesValues
rdfs:label
  • Eurorack
rdfs:comment
  • A modular synthesizer format which falls into the "small format" category. Originally derived from various standards for 19" rack system based industrial and lab instrumentation known as (DIN 41494 / IEC 297-3 / IEEE 1001.1) and sometimes housed 'Eurocard' technology. Not to be confusedor with the line of low-cost mixers marketed by Behringer under this name. The Eurorack format calls for modules of 128.5mm (slightly over 5") height. Horizontal width is measured in "horizontal pitch", where 1 HP = 5.08mm (exactly 0.2"). 3.5mm mono phone jacks are used for interconnection.
dcterms:subject
abstract
  • A modular synthesizer format which falls into the "small format" category. Originally derived from various standards for 19" rack system based industrial and lab instrumentation known as (DIN 41494 / IEC 297-3 / IEEE 1001.1) and sometimes housed 'Eurocard' technology. Not to be confusedor with the line of low-cost mixers marketed by Behringer under this name. The Eurorack format calls for modules of 128.5mm (slightly over 5") height. Horizontal width is measured in "horizontal pitch", where 1 HP = 5.08mm (exactly 0.2"). 3.5mm mono phone jacks are used for interconnection. The Eurorack format calls for ±12V power (most other current formats use ±15V), in addition +5V is required by some modules. Unfortunately, the orientation of the power connections are not well standardized; the format uses ribbon cables for power and a two-row ribbon cable connector containing either 10 or 16 pins. A "red stripe" on the ribbon indicates -12V. The 16-pin connector uses the extra pins to distribute +5V, control voltage and gate signals from a keyboard to the modules via a common case connection. Manufacturers using the Eurorack format include Doepfer, Analogue Systems, MFB, Cwejman, Mutable Instruments, Befaco and River in Europe, and Make Noise, Intellijel, Plan B, Livewire, and Harvestman in the North America.
Alternative Linked Data Views: ODE     Raw Data in: CXML | CSV | RDF ( N-Triples N3/Turtle JSON XML ) | OData ( Atom JSON ) | Microdata ( JSON HTML) | JSON-LD    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3217, on Linux (x86_64-pc-linux-gnu), Standard Edition
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2012 OpenLink Software