About: Building my 'Forever' Garland

Description
Metadata
Settings
- owl:sameAs
- Inference Rule:

About: Building my 'Forever' Garland Sponge Permalink

An Entity of Type : owl:Thing, within Data Space : 134.155.108.49:8890 associated with source dataset(s)

My goal in this project was to build a traditional swivel-per-loop garland but with all metal moving parts. At no point does fabric wear against metal nor is the fabric of any loop interrupted by metal. I wanted a large loop garland that would make bubbles suitable for people to do bubble-in-bubble with. IMO, the maximum practical garland loop size is about 255 mm (10 inches) and my favorite material for good bubble stream duration is 3x braided Bed Bath & Beyond twine.

Attributes	Values
rdfs:label	Building my 'Forever' Garland
rdfs:comment	My goal in this project was to build a traditional swivel-per-loop garland but with all metal moving parts. At no point does fabric wear against metal nor is the fabric of any loop interrupted by metal. I wanted a large loop garland that would make bubbles suitable for people to do bubble-in-bubble with. IMO, the maximum practical garland loop size is about 255 mm (10 inches) and my favorite material for good bubble stream duration is 3x braided Bed Bath & Beyond twine.
dcterms:subject	DIY Garland
abstract	My goal in this project was to build a traditional swivel-per-loop garland but with all metal moving parts. At no point does fabric wear against metal nor is the fabric of any loop interrupted by metal. I wanted a large loop garland that would make bubbles suitable for people to do bubble-in-bubble with. IMO, the maximum practical garland loop size is about 255 mm (10 inches) and my favorite material for good bubble stream duration is 3x braided Bed Bath & Beyond twine.

OpenLink Virtuoso version 07.20.3217, on Linux (x86_64-pc-linux-gnu), Standard Edition
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2012 OpenLink Software