If you don't want to read this short guide, or the somewhat longer official CHDK User Manual , here's a quick list of what you need to do to load and run CHDK. 1. * Download and install the STICK utility from this link >: STICK 2. * Run STICK to configure your SD card and install CHDK. 3. * Put the SD card's lock switch into the "locked" position and put the card into your camera. 4. * Start your camera normally. You should see the red CHDK logo appear for a few seconds. 5. * Press the defined key for your camera to enter CHDK mode. The key is usually either the PRINT or PLAY button. However, some cameras use the DISP, VIDEO, HELP or FACE buttons so you might have to try different buttons to find the right one. 6. * Press the MENU button in mode to access th