This HTML5 document contains 7 embedded RDF statements represented using HTML+Microdata notation.

The embedded RDF content will be recognized by any processor of HTML5 Microdata.

Subject Item

n2:

rdfs:label

Socket-wrench set

rdfs:comment

A socket-wrench set, was a kit of tools containing a socket-wrench and assorted sockets. The socket-wrench, more commonly referred to as a ratchet-wrench, was a type of wrench, or tightening tool, that used separate, removable sockets to fit many different sizes of fittings and fasteners, most commonly nuts and bolts. The socket-wrench included a ratcheting mechanism that allowed the nut to be tightened or loosened with a reciprocating motion, without requiring that the wrench be removed and refitted after each turn. Typically, a small lever behind the socket switches the wrench between tightening and loosening mode. The sockets were attached to the ratchet through a square fitting that contains a spring loaded ball detent mechanism to keep the sockets in place. The advantage of the socket

dcterms:subject

n6:

n3:wikiPageUsesTemplate

n4: n8: n10:

n9:abstract

A socket-wrench set, was a kit of tools containing a socket-wrench and assorted sockets. The socket-wrench, more commonly referred to as a ratchet-wrench, was a type of wrench, or tightening tool, that used separate, removable sockets to fit many different sizes of fittings and fasteners, most commonly nuts and bolts. The socket-wrench included a ratcheting mechanism that allowed the nut to be tightened or loosened with a reciprocating motion, without requiring that the wrench be removed and refitted after each turn. Typically, a small lever behind the socket switches the wrench between tightening and loosening mode. The sockets were attached to the ratchet through a square fitting that contains a spring loaded ball detent mechanism to keep the sockets in place. The advantage of the socket-wrench system was speed - it was much faster than a conventional wrench, especially in repetitive bolt-on or bolt-off usage. A breaker bar was often included in a socket-wrench set. A breaker bar was a long non-ratcheting bar that was used with socket-wrench style sockets. Breaker bars were used to 'break loose' very tight fasteners because their additional length allowed the same amount of force to generate significantly more torque than a standard length socket-wrench. The use of a breaker bar also prevented damage to the ratcheting mechanism of a socket-wrench.