This HTML5 document contains 15 embedded RDF statements represented using HTML+Microdata notation.

The embedded RDF content will be recognized by any processor of HTML5 Microdata.

Subject Item

n10:

n11:

n2:

Subject Item

n12:

n11:

n2:

Subject Item

n17:

n11:

n2:

Subject Item

n19:

n11:

n2:

Subject Item

n2:

rdfs:label

Automatic transmission

rdfs:comment

An automatic transmission (commonly abbreviated as "AT") is an gearbox that can change gear ratios automatically as the vehicle moves, thus freeing the driver from having to shift gears manually (similar but larger devices are also used for railroad locomotives). Most automatic transmissions have a set selection of possible gear ranges, often with a parking pawl feature that will lock the output shaft of the transmission. The other type that has become more comon is the TorqueConverter, or Hydrostatic transmissions in machines such as Combines, Excavators, Forklifts, and other plant. An automatic transmission (commonly "AT" or "Auto") is an Automobile Gearbox that can change Gear ratios automatically as the vehicle moves, freeing the driver from having to shift gears manually. Similar but larger devices are also used for heavy-duty commercial and industrial vehicles and equipment. Some machines with limited speed ranges or fixed engine speeds, such as some Forklift trucks and Lawn mowers, only use a torque converter to provide a variable gearing of the engine to the wheels.

owl:sameAs

dbr:Automatic_transmission

dcterms:subject

n16: n18:

n3:wikiPageUsesTemplate

n4: n6:

n8:wikiPageUsesTemplate

n9:

n7:abstract

An automatic transmission (commonly abbreviated as "AT") is an gearbox that can change gear ratios automatically as the vehicle moves, thus freeing the driver from having to shift gears manually (similar but larger devices are also used for railroad locomotives). Most automatic transmissions have a set selection of possible gear ranges, often with a parking pawl feature that will lock the output shaft of the transmission. However, some simple machines with limited speed ranges and/or fixed engine speeds only use a torque converter to provide a variable gearing of the engine to the wheels. Typical examples include forklift trucks and some modern lawn mowers. Recently manufacturers have begun to make continuously variable transmissions commonly available (earlier models such as the Subaru Justy did not popularize CVT). These designs can change the ratios over a range rather than between set gear ratios. Even though CVTs have been used for decades in two-wheeled scooters and in a few cars (e.g. DAF saloons and the Volvo 340 series that succeeded them, and later the Subaru Justy), the technology has recently gained greater acceptance among manufacturers and customers. Early Combine Harvesters used a version of CVT, to vary the input speed to the gear box using a Variable ratio belt drive as on the Daf car, so a variable speed range is available in each gear allowing constant engine speed to drive the threshing mechanism. The other type that has become more comon is the TorqueConverter, or Hydrostatic transmissions in machines such as Combines, Excavators, Forklifts, and other plant. Header from wikipedia Automatic transmission: Full article here An automatic transmission (commonly "AT" or "Auto") is an Automobile Gearbox that can change Gear ratios automatically as the vehicle moves, freeing the driver from having to shift gears manually. Similar but larger devices are also used for heavy-duty commercial and industrial vehicles and equipment. Most automatic transmissions have a set selection of possible gear ranges, often with a Parking pawl feature that will lock the output shaft of the transmission. Continuously variable transmissions (CVTs) can change the ratios over a range rather than between set gear ratios. CVTs have been used for decades in two-wheeled scooters but have seen limited use in a few automobile models. Recently, however, CVT technology has gained greater acceptance among manufacturers and customers. Some machines with limited speed ranges or fixed engine speeds, such as some Forklift trucks and Lawn mowers, only use a torque converter to provide a variable gearing of the engine to the wheels.