This HTML5 document contains 15 embedded RDF statements represented using HTML+Microdata notation.

The embedded RDF content will be recognized by any processor of HTML5 Microdata.

Subject Item

n2:

rdfs:label

Slipcasting

rdfs:comment

Slipcasting is a technique for the mass-production of pottery, especially for shapes not easily made on a wheel. A liquid clay body slip (usually mixed in a blunger) is poured into plaster moulds and allowed to form a layer, the cast, on the inside cavity of the mould. In a solid cast mould, ceramic objects such as handles and platters are surrounded by plaster on all sides with a reservoir for slip, and are removed when the solid piece is held within. For a hollow cast mould, once the plaster has absorbed most of the liquid from the outside layer of clay the remaining slip is poured off for later use. The cast piece is removed from the mould, "fettled" (trimmed neatly) and allowed to dry. This produces a greenware piece which is then dried before firing, with or without decoration and gla

owl:sameAs

dbr:Slipcasting

dcterms:subject

n5: n8: n17: n19:

n3:

Diccionario de cerámica Inglés/Español: Índice adicional

n6:wikiPageUsesTemplate

n7: n9: n13: n14:

n16:

Slipcasting

n15:

Moldeo por colada

n18:abstract

Slipcasting is a technique for the mass-production of pottery, especially for shapes not easily made on a wheel. A liquid clay body slip (usually mixed in a blunger) is poured into plaster moulds and allowed to form a layer, the cast, on the inside cavity of the mould. In a solid cast mould, ceramic objects such as handles and platters are surrounded by plaster on all sides with a reservoir for slip, and are removed when the solid piece is held within. For a hollow cast mould, once the plaster has absorbed most of the liquid from the outside layer of clay the remaining slip is poured off for later use. The cast piece is removed from the mould, "fettled" (trimmed neatly) and allowed to dry. This produces a greenware piece which is then dried before firing, with or without decoration and glaze. The technique is suited to the production of complex shapes, and is commonly used for sanitary ware, such as toilets and basins, and smaller pieces like figurines and teapots. The technique can also be used for small scale production runs or to produce limited editions of objects. The French for slip is barbotine ("Coulée en barbotine" is slipcasting), and "barbotine pottery" is sometimes used for 19th century French and American pottery with added slipcast decoration.