This HTML5 document contains 58 embedded RDF statements represented using HTML+Microdata notation.

The embedded RDF content will be recognized by any processor of HTML5 Microdata.

Subject Item

n2:

rdfs:label

Control water Control Water

rdfs:comment

[[Category:]] Control water, also known as lower water and its reverse, raise water, was a transmutation/alteration spell that allowed the caster to gain some control over a body of water. Level: , , , Components: V, S, M/DF Casting Time: 1 action Range: Long (400 ft. + 40 ft./level) Area: Water in a volume of 10 ft./level by 10 ft./level by 2 ft./level (S) Duration: 10 min./level (D) Saving Throw: None; see text Spell Resistance: No Casting Time: 1 action Range: 300 feet Components: V, S, M (a drop of water and a pinch of dust) Duration: Concentration, up to 10 minutes Until the spell ends, you control any freestanding water inside an area you choose that is a cube up to 100 feet on a side. You can choose from any of the following effects when you cast this spell. As an action on your turn, you can repeat the same effect or choose a different one. Flood. You cause the water level of all standing water in the area to rise by as much as 20 feet. If the area includes a shore, the flooding water spills over onto dry land. Casting Time: 1 action Range: 300 feet Components: V, S , M (a drop of water and a pinch of dust) Duration: Concentration, up to 10 minutes Until the spell ends, you control any freestanding water inside an area you choose that is a cube up to 100 feet on a side. You can choose from any of the following effects when you cast this spell. As an action on your turn, you can repeat the same effect or choose a different one. Flood. You cause the water level of all standing water in the area to rise by as much as 20 feet. If the area includes a shore, the flooding water spills over onto dry land.

dcterms:subject

n8: n9: n15: n18: n22: n28: n32: n33: n36: n37: n39: n41: n45: n46: n47: n57: n59: n61:

n19:wikiPageUsesTemplate

n20: n35: n42: n52: n62:

n23:wikiPageUsesTemplate

n24: n29: n34: n40: n53:

n25:wikiPageUsesTemplate

n26: n27: n38: n48: n50: n58: n60:

n3:

Control Water

n11:

n5:

n54:

true

n10:

true

n13:

n14:

n4:

n5:

n51:

n14:

n43:

n44:

n16:

n17: n21:

n30:

n31: n49:

n55:

n56:

n6:abstract

Casting Time: 1 action Range: 300 feet Components: V, S, M (a drop of water and a pinch of dust) Duration: Concentration, up to 10 minutes Until the spell ends, you control any freestanding water inside an area you choose that is a cube up to 100 feet on a side. You can choose from any of the following effects when you cast this spell. As an action on your turn, you can repeat the same effect or choose a different one. Flood. You cause the water level of all standing water in the area to rise by as much as 20 feet. If the area includes a shore, the flooding water spills over onto dry land. If you choose an area in a large body of water, you instead create a 20-foot tall wave that travels from one side of the area to the other and then crashes down. Any huge or smaller vehicles in the wave’s path are carried with it to the other side. Any huge or smaller vehicles struck by the wave have a 25 percent chance of capsizing. The water level remains elevated until the spell ends or you choose a different effect. If this effect produced a wave, the wave repeats on the start of your next turn while the flood effect lasts. Part Water. You cause water in the area to move apart and create a trench. The trench extends across the spell’s area, and the separated water forms a wall to either side. The trench remains until the spell ends or you choose a different effect. The water then slowly fills in the trench over the course of the next round until the normal water level is restored. Redirect Flow. You cause following water in the area to move in a direction you choose, even if the water has to flow over obstacles, up walls, or in other unlikely directions. The water in the area moves as you direct it, but once it moves beyond the spell’s area, it resumes its flow based on terrain conditions. The water continues to move in the direction you chose until the spell ends or you choose a different effect. Whirlpool. This effect requires a body of water at least 50 feet square and 25 feet deep. You cause a whirlpool to form in the center of the area. The whirlpool forms a vortex that is 5 feet wide at the base, up to 50 feet wide at the top, and 25 feet tall. Any creature or object in the water and within 25 feet of the vortex is pulled 10 feet toward it. A creature can swim away from the vortex by making a Strength (Athletics) check against your spell save DC. When a creature enters the vortex for the first time on a turn or starts its turn there, it must make a Strength saving throw. On a failed save, the creature takes 2d8 bludgeoning damage and is caught in the vortex until the spell ends. On a successful save, the creature takes half damage, and isn’t caught in the vortex. A creature caught in the vortex can use its action to try to swim away from the vortex as described above, but has disadvantage on the Strength (Athletics) check to do so. The first time each turn that an object enters the vortex, the objects takes 2d8 bludgeoning damage; this damage occurs each round it remains in the vortex. [[Category:]] Control water, also known as lower water and its reverse, raise water, was a transmutation/alteration spell that allowed the caster to gain some control over a body of water. Casting Time: 1 action Range: 300 feet Components: V, S , M (a drop of water and a pinch of dust) Duration: Concentration, up to 10 minutes Until the spell ends, you control any freestanding water inside an area you choose that is a cube up to 100 feet on a side. You can choose from any of the following effects when you cast this spell. As an action on your turn, you can repeat the same effect or choose a different one. Flood. You cause the water level of all standing water in the area to rise by as much as 20 feet. If the area includes a shore, the flooding water spills over onto dry land. If you choose an area in a large body of water, you instead create a 20-foot tall wave that travels from one side of the area to the other and then crashes down. Any Huge or smaller vehicles in the wave’s path are carried with it to the other side. Any Huge or smaller vehicles struck by the wave have a 25 percent chance of capsizing. The water level remains elevated until the spell ends or you choose a different effect. If this effect produced a wave, the wave repeats on the start of your next turn while the flood effect lasts. Part Water. You cause water in the area to move apart and create a trench. The trench extends across the spell’s area, and the separated water forms a wall to either side. The trench remains until the spell ends or you choose a different effect. The water then slowly fills in the trench over the course of the next round until the normal water level is restored. Redirect Flow. You cause flowing water in the area to move in a direction you choose, even if the water has to flow over obstacles, up walls, or in other unlikely directions. The water in the area moves as you direct it, but once it moves beyond the spell’s area, it resumes its flow based on the terrain conditions. The water continues to move in the direction you chose until the spell ends or you choose a different effect. Whirlpool. This effect requires a body of water at least 50 feet square and 25 feet deep. You cause a whirlpool to form in the center of the area. The whirlpool forms a vortex that is 5 feet wide at the base, up to 50 feet wide at the top, and 25 feet tall. Any creature or object in the water and within 25 feet of the vortex is pulled 10 feet toward it. A creature can swim away from the vortex by making a Strength (Athletics) check against your spell save DC. When a creature enters the vortex for the first time on a turn or starts its turn there, it must make a Strength saving throw. On a failed save, the creature takes 2d8 bludgeoning damage and is caught in the vortex until the spell ends. On a successful save, the creature takes half damage, and isn’t caught in the vortex. A creature caught in the vortex can use its action to try to swim away from the vortex as described above, but has disadvantage on the Strength (Athletics) check to do so. The first time each turn that an object enters the vortex, the object takes 2d8 bludgeoning damage; this damage occurs each round it remains in the vortex. Level: , , , Components: V, S, M/DF Casting Time: 1 action Range: Long (400 ft. + 40 ft./level) Area: Water in a volume of 10 ft./level by 10 ft./level by 2 ft./level (S) Duration: 10 min./level (D) Saving Throw: None; see text Spell Resistance: No