. "At the start of the First World War, Vickers entered into a partnership with the Hart Engine Company to develop a 150 hp (110 kW) nine-cyliner radial engine designed by Hart. This engine was planned to power a number of new designs by Vickers, the first of which was a small single-engine pusher biplane fighter, the F.B.12. The F.B.12 resembled the D.H.2 and F.E.8; wood and fabric wings with rounded tips. The circular nacelle was framed in steel tubing, with the engine directly behind the cockpit, driving a wooden propeller. The tail was at the end of an open steel boom. A .303 in (7.7 mm) machine gun was placed inside the front of the nacelle, with only the barrel protruding. The first FB.12 flew in June 1916, powered by a 80 hp (60 kW) Le Rh\u00F4ne rotary engine as the Hart was not yet available. With this engine, it proved to be underpowered and was re-fitted with a 100 hp (75 kW) Gnome Monosoupape engine. It was then rebuilt with increased wing span and area, becoming the F.B.12A. In December 1916 it was sent to France for operational testing, where it was deemed as good as the D.H.2 and F.E.8, a rather back-handed recommendation as both these types were by now well outclassed by the latest German fighters. The F.B.12B was similar to the F.B.12A, but fitted with the originally intended Hart engine, flying early in 1917. In November 1916, meanwhile, the War Office placed an order for 50 Hart powered aircraft, designated the F.B.12C for the RFC. The F.B.12B crashed during tests in early 1917, leading to Vickers abandoning the Hart. Only 18 of the order were built, being fitted with a number of different engines including a 110 hp (80 kW) Le Rh\u00F4ne and a 100 hp (75 kW) Anzani radial. Tested between May and July 1917, only 1 F.B.12C was delivered, to a Home Defence unit. The F.B.12D was the final variation, only 1 prototype was produced with a larger 110 hp (80 kW) Le Rhone engine."@en . . . "July"@en . . "86"^^ . "One .303 in Lewis gun"@en . . . "100"^^ . "26"^^ . "384"^^ . . "19"^^ . . "Gnome Monosoupape nine-cylinder rotary engine"@en . "3500"^^ . . "1"^^ . "1275"^^ . "eng"@en . . . . "204"^^ . . . . "138"^^ . "6"^^ . "11500"^^ . . "580"^^ . . "21"^^ . "War Planes of the First World War: Volume Three"@en . "2.64"^^ . . "7.93"^^ . "~22"@en . "75"^^ . "8"^^ . "6.55"^^ . . "At the start of the First World War, Vickers entered into a partnership with the Hart Engine Company to develop a 150 hp (110 kW) nine-cyliner radial engine designed by Hart. This engine was planned to power a number of new designs by Vickers, the first of which was a small single-engine pusher biplane fighter, the F.B.12. The F.B.12D was the final variation, only 1 prototype was produced with a larger 110 hp (80 kW) Le Rhone engine."@en . "845"^^ . "Vickers F.B.12"@en . "1"^^ . "8"^^ . "3"^^ .